Tech Wash

Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your jacket must be maintained to ensure comfort. Nikwax Tech Wash^® will revitalize the DWR and therefore breathability of your garment.

Waterproof clothing needs to be breathable…

When we work hard, we sweat. The evaporation of sweat cools us down and keeps us comfortable. But, when it rains we want to avoid getting wet, so we put on waterproof outerwear to keep us dry.

The waterproof fabric must allow moisture vapor to pass through it, or ‘breathe’; otherwise our sweat cannot evaporate, causing us to overheat and get wet from condensation. Additionally, if the outer fabric of your garment absorbs water and ‘wets out’ its breathability will be reduced, causing you to feel clammy and wet.

Nikwax Tech Wash^® will revitalize the Durable Water Repellency (DWR) of your garment preventing water absorption, maintaining breathability and keeping you dry and comfortable.

Use Nikwax Tech Wash® in a washing machine… IMPORTANT: Do not use conventional detergents. Use Stain Scrub to treat stubborn stains before washing. Standard and High Efficiency Front Loading Machine Wash Remove all detergent build-up from the detergent dispenser. Place a maximum of 2 garments in the washing machine. Add 3.5 fl oz (100 ml) of Tech Wash. Select a normal cycle using warm/cold water and an extra rinse if possible. Standard Top Loading Machine Wash High Efficiency Top Loading Machine Wash Place a maximum of 4 garments in the washing machine. After the machine has filled, add 5 fl oz (150 ml) of Tech Wash for 1–3 garments or 8.5 fl oz (250 ml) for 4–6 garments. Select a normal cycle using warm/cold water and an extra rinse if possible. Remove all detergent build-up from the detergent dispenser. Place a maximum of 4 garments in the washing machine. Add 5 fl oz (150 ml) of Tech Wash for 1–3 garments or 6.5 fl oz (200 ml) for 4–6 garments. Select a normal cycle using warm/cold water and an extra rinse if possible. Nikwax Tech Wash® can also be applied by hand… Hand Wash (use gloves): Immerse item(s) in 2 gallons (7.5L) of warm water in a lundry tub or sink. Add 1.5fl oz/50ml per item. Agitate to mix. Rinse 3 times in clean water. Drying: Do not dry before waterproofing. Air dry or tumble dry on a low setting if care label allows.